Mould and your health
Mould and your health
About mould
Mould is a type of fungus that lives on plant and animal matter. This can include building materials like wood and gypsum plasterboard and furnishings like carpet and curtains and even books and boxes.
Mould grows best in damp and poorly ventilated areas and reproduces by making spores.
Airborne mould spores are commonly found in both indoor and outdoor environments. When they land on damp spots indoors, they may begin to grow and spread. There is no practical way to eliminate all mould indoors; the way to control indoor mould growth is to control the source of moisture.
It is important that your home has good ventilation to minimise internal moisture and prevent mould growth.
What mould looks like
Mould is not always easy to recognise. It often looks like ‘fuzz’ or appears to be a stain, smudge or discoloration. The most common moulds are black, green or white. However, mould can be many other colours, ranging from grey to orange to brown and can also change depending on age or life-stage.
How mould affects health
Mould associated with damp buildings can trigger nasal congestion, sneezing, cough, wheeze, respiratory infections and worsen asthma and allergic conditions.
People who are more susceptible to these symptoms and other serious health effects include those with:
weakened immune systems
allergies
severe
asthma
chronic, obstructive, or allergic
lung
diseases.
You should seek medical advice if you are concerned about the effects of mould.
Causes of mould growth indoors
Mould only grows when there is sufficient moisture on a surface or humidity in the air. Common causes include:
leaking roofs and walls
Faulty plumbing including blocked gutters and downpipes
condensation from cooking, showering, clothes drying and in areas with poor air circulation eg cupboards, corners and furniture against uninsulated outside walls. Avoid conditions encouraging mould growth, by using heat, insulation and ventilation. The cheapest and easiest way of reducing moisture and humidity levels is by ventilating a room by opening a door or window. Use exhaust fans where available.
Actions you can take to reduce mould
The most important actions you can take to prevent
mould in your home
are those that minimise moisture.
Fix leaky plumbing and roofs and other building faults
Ensure gutters are cleared and maintained
Reduce condensation by using exhaust fans, or open windows in the bathroom and kitchen when showering, cooking or using the dishwasher
Wipe up excess water caused by condensation such as on single glazed windows and on shower glazing
Air the home regularly by opening windows and doors on warmer days
Vent clothes dryers to the outside and clean lint filters according to the manufacturer’s instructions.
Use reverse cycle air conditioning and or mechanical dehumidification if available
Ensure sufficient exhaust openings to the outside of the building if using evaporative cooling. Evaporative coolers increase the moisture content in indoor air, so the manufacturer’s instructions should be followed to ensure airflow in the home.
Maintain heating, ventilation and cooling systems (this includes regular servicing) according to the manufacturer’s instructions.
Use a vacuum cleaner with a HEPA (high efficiency particulate air) filter.
Avoid placing mattresses on the floor or surfaces without adequate ventilation.
Vacuum, and or turn mattresses if it can be done safely.
Increase air circulation around furniture by moving the furniture away from the walls.
Rental properties with mould issues
When a rental property has mould, the owner should fix any mould caused by faults in gutters or other fixtures, but the tenant should ensure that extractor fans are used when available and the home is aired regularly where possible.
Sometimes, the cause of the mould growth may be due to a building fault that may not be easily rectified.
If as a tenant, you have taken measures to make sure the building is properly ventilated and mould is still growing, you should raise the issue with the owner.
Information on mould in rental properties is available on
Consumer Affairs Victoria’s
website
External Link
.
Tenants seeking further advice on their rights can also contact the
Tenants Union of
Victoria
External Link
on Tel.
03 9416 2577
.
Testing for mould in your home
Where mould is visible, it is generally not considered necessary to test for it in the home. However, not all mould is visible, as contamination may be in cavities or the ceiling. Generally, if you can see or smell mould, you need to clean up and remove the mould immediately, as mould can damage surfaces it grows on.
If you suspect mould contamination but cannot find the source of the problem, or if you have already taken measures to prevent mould from growing and you are still having problems, you could employ an occupational hygienist or environmental health and safety professional. For a fee, these professionals can provide specialist mould testing and consultancy services.
Where to get help
If you or anyone in your family feels unwell, seek medical advice from your local
GP (doctor)
or call
NURSE-ON-CALL
24 hours a day, 7 days a week on Tel.
1300 60 60 24
for health information and advice and in an emergency, always call triple zero (000)
Environmental health section of your
local
council
External Link
Your insurance company
Consumer Affairs
Victoria
External Link
Tel.
1300 55 81 81
or for National translation service, Tel.
131 450
. Call this number ask to be put through to Consumer Affairs Victoria.
Tenants Union of
Victoria
External Link
Tel. Tel.
03 9416 2577
Domestic Building Resolution Complaints
Service
External Link
Flood information in community languages
After a flood: mould and your
health
External Link
, Health Translations
After a flood: animal and insect-related
hazards
External Link
, Health Translations
Returning home after a
flood
External Link
, Health Translations
Emergency, crisis and support services in
Victoria
External Link
, Health Translations
FloodSafe
(audio)
External Link
, Health Translations